FAQFAQ SuchenSuchen MitgliederlisteMitgliederliste BenutzergruppenBenutzergruppen  RegistrierenRegistrieren  ProfilProfil Einloggen, um private Nachrichten zu lesenP.M. LoginLogin
Apollo LES 4"
Gehe zu Seite Zurück  1, 2, 3, 4, 5, 6, 7, 8  Weiter
 
Neues Thema eröffnen   Neue Antwort erstellen    EURocketry Foren-Übersicht -> Scale Modellbau
Vorheriges Thema anzeigen :: Nächstes Thema anzeigen  

Autor Nachricht
g_boxwood



Anmeldungsdatum: 08.06.2006
Beiträge: 172

BeitragVerfasst am: So 08 Feb 2009, 12:07    Titel: Antworten mit Zitat

[SIZE="4"]Command Module (CM) Plug[/SIZE]

I'll make the CM a 2 pieces fiberglass entity thus requiring 2 different molds: the conical section and the heatshield one.

I started with the conical plug, being it the biggest one.

I designed a lite-ply frame and I cut the required pieces on my own: the largest (base) ring spans something more than 24" but it is still Dremel cut-table!!!

The templates were transferred to the wood...



... and cut:



It was still possible to cut the inner 4" dia hole with the Dremel!




_________________
Giacomo 'g_boxwood' Bosso
TRA#9986 L2
Nach oben
Benutzer-Profile anzeigen Private Nachricht senden
Autor Nachricht
g_boxwood



Anmeldungsdatum: 08.06.2006
Beiträge: 172

BeitragVerfasst am: So 08 Feb 2009, 12:07    Titel: Antworten mit Zitat

The twelve stringers followed...



... and the assembly began around a 4" airframe core section:





The very first overall impression:


_________________
Giacomo 'g_boxwood' Bosso
TRA#9986 L2
Nach oben
Benutzer-Profile anzeigen Private Nachricht senden
Autor Nachricht
g_boxwood



Anmeldungsdatum: 08.06.2006
Beiträge: 172

BeitragVerfasst am: So 08 Feb 2009, 12:08    Titel: Antworten mit Zitat

In the meanwhile I put the parting board together (thick MDF):



I added small MDF blocks to the CM frame to better support the joining screws:




_________________
Giacomo 'g_boxwood' Bosso
TRA#9986 L2
Nach oben
Benutzer-Profile anzeigen Private Nachricht senden
Autor Nachricht
g_boxwood



Anmeldungsdatum: 08.06.2006
Beiträge: 172

BeitragVerfasst am: So 08 Feb 2009, 12:08    Titel: Antworten mit Zitat

Skinning the frame required some thought. I started by sanding the frame smooth:



Then I rolled it over 2 layers of cloth to mark the skin outline:



Next I laminated those 2 layers on a flat surface:



Finally the skin was applied to the frame using Gorilla Glue (whose foaming action fills most of the voids):


_________________
Giacomo 'g_boxwood' Bosso
TRA#9986 L2
Nach oben
Benutzer-Profile anzeigen Private Nachricht senden
Autor Nachricht
g_boxwood



Anmeldungsdatum: 08.06.2006
Beiträge: 172

BeitragVerfasst am: So 08 Feb 2009, 12:08    Titel: Antworten mit Zitat

The tip was added (again it consists of a balsa-filled ply frame)...





... it was sanded to shape...



... and finally glassed:


_________________
Giacomo 'g_boxwood' Bosso
TRA#9986 L2
Nach oben
Benutzer-Profile anzeigen Private Nachricht senden
Autor Nachricht
g_boxwood



Anmeldungsdatum: 08.06.2006
Beiträge: 172

BeitragVerfasst am: So 08 Feb 2009, 12:09    Titel: Antworten mit Zitat

While I was filling some of the defects...



... I felt the plug needed some more stiffness so I went with 2 more external layers of cloth:






_________________
Giacomo 'g_boxwood' Bosso
TRA#9986 L2
Nach oben
Benutzer-Profile anzeigen Private Nachricht senden
Autor Nachricht
g_boxwood



Anmeldungsdatum: 08.06.2006
Beiträge: 172

BeitragVerfasst am: So 08 Feb 2009, 12:09    Titel: Antworten mit Zitat

Then it came the mandatory yet boring fill'n'sand part of the business:






_________________
Giacomo 'g_boxwood' Bosso
TRA#9986 L2
Nach oben
Benutzer-Profile anzeigen Private Nachricht senden
Autor Nachricht
g_boxwood



Anmeldungsdatum: 08.06.2006
Beiträge: 172

BeitragVerfasst am: So 08 Feb 2009, 12:09    Titel: Antworten mit Zitat

Just a few days before Christmas I had the chance to give it the very first primer coats!

I started with a paint-promoter coat...





... followed by the primer:


_________________
Giacomo 'g_boxwood' Bosso
TRA#9986 L2
Nach oben
Benutzer-Profile anzeigen Private Nachricht senden
Autor Nachricht
g_boxwood



Anmeldungsdatum: 08.06.2006
Beiträge: 172

BeitragVerfasst am: So 08 Feb 2009, 12:10    Titel: Antworten mit Zitat

[SIZE="4"]Heatshield Plug[/SIZE]

Before finishing the conical section plug I need to put together the heatshield plug to match them precisely!

I spent a little time in front of the PC to figure out how to model the curvature of the heatshield. I came out with the following solution based on lite-ply framing and foam.

Notched base ring with 29 mm core:



Vertical frames and interlocking diagonal plates:





Raw foam blocks:


_________________
Giacomo 'g_boxwood' Bosso
TRA#9986 L2
Nach oben
Benutzer-Profile anzeigen Private Nachricht senden
Autor Nachricht
g_boxwood



Anmeldungsdatum: 08.06.2006
Beiträge: 172

BeitragVerfasst am: So 08 Feb 2009, 12:15    Titel: Antworten mit Zitat

The raw blocks will then be sanded down to the desired shape and a custom rotating spatula will spread the filling compound homogeneously around the plug {pic.1}.

In the meanwhile I also tried to model the original launch base {pic.2} with the safest rod arrangement: we're talking about 4 10mm steel rods spaced 90° apart running trough the command module and the booster motor skirt, see pic.3.



DMU_MOLD_HEAT_05.jpg
 Beschreibung:
 Dateigröße:  46.73 KB
 Angeschaut:  2537 mal

DMU_MOLD_HEAT_05.jpg



2869435719_cdb952d97a.jpg
 Beschreibung:
 Dateigröße:  144.64 KB
 Angeschaut:  2537 mal

2869435719_cdb952d97a.jpg



ON_PAD_01.jpg
 Beschreibung:
 Dateigröße:  46.63 KB
 Angeschaut:  2537 mal

ON_PAD_01.jpg



_________________
Giacomo 'g_boxwood' Bosso
TRA#9986 L2
Nach oben
Benutzer-Profile anzeigen Private Nachricht senden
Autor Nachricht
Tom Engelhardt



Anmeldungsdatum: 05.08.2005
Beiträge: 318
Wohnort: Göttingen

BeitragVerfasst am: So 08 Feb 2009, 13:48    Titel: Antworten mit Zitat

Giacomo,

that is outstanding, both design and craftmanship!!!! Well done!

You have to bring this to ALRS, it will most certainly be quite a show!!!

Tom

_________________
Science flies you to the Moon.
Religion flies you into buildings.
Nach oben
Benutzer-Profile anzeigen Private Nachricht senden Website dieses Benutzers besuchen MSN Messenger
Autor Nachricht
Juerg
Site Admin


Anmeldungsdatum: 27.02.2005
Beiträge: 4545
Wohnort: Oberengstringen

BeitragVerfasst am: So 08 Feb 2009, 19:45    Titel: Antworten mit Zitat

Very very very cooool! Shocked
_________________
http://www.SpacetecRocketry.com
Nach oben
Benutzer-Profile anzeigen Private Nachricht senden E-Mail senden Website dieses Benutzers besuchen MSN Messenger
Autor Nachricht
Rolli



Anmeldungsdatum: 07.03.2005
Beiträge: 666
Wohnort: D-38820 Halberstadt

BeitragVerfasst am: So 08 Feb 2009, 23:17    Titel: Antworten mit Zitat

Shocked alle Achtung, sowas von scale! Boah, bin begeistert und neidisch zugleich... ein ganz großes Kompliment!

Grüße Rolli
Nach oben
Benutzer-Profile anzeigen Private Nachricht senden Website dieses Benutzers besuchen MSN Messenger
Autor Nachricht
MikeHB



Anmeldungsdatum: 16.07.2005
Beiträge: 157
Wohnort: Bremen

BeitragVerfasst am: Mo 09 Feb 2009, 0:03    Titel: Antworten mit Zitat

I am deeply impressed! Wonderful to see the gold old technique of Apollo rising again, right on time for the 40th anniversary of Apollo 11th epic journey to the moon.

Keep on going!

Michael

_________________
Sagt Abraham zu Bebraham: Kann ich mal Dein Cebra ham?
Nach oben
Benutzer-Profile anzeigen Private Nachricht senden Website dieses Benutzers besuchen MSN Messenger
Autor Nachricht
g_boxwood



Anmeldungsdatum: 08.06.2006
Beiträge: 172

BeitragVerfasst am: Mo 09 Feb 2009, 10:26    Titel: Antworten mit Zitat

Thank you all!

I was a bit worried about it due to the unusual design and cluster requirements.

Do you think the rod setup will be adequate?

_________________
Giacomo 'g_boxwood' Bosso
TRA#9986 L2
Nach oben
Benutzer-Profile anzeigen Private Nachricht senden
Beiträge der letzten Zeit anzeigen:   
Neues Thema eröffnen   Neue Antwort erstellen    EURocketry Foren-Übersicht -> Scale Modellbau Alle Zeiten sind GMT + 2 Stunden
Gehe zu Seite Zurück  1, 2, 3, 4, 5, 6, 7, 8  Weiter
Seite 2 von 8
Gehe zu:  
Du kannst keine Beiträge in dieses Forum schreiben.
Du kannst auf Beiträge in diesem Forum nicht antworten.
Du kannst deine Beiträge in diesem Forum nicht bearbeiten.
Du kannst deine Beiträge in diesem Forum nicht löschen.
Du kannst an Umfragen in diesem Forum nicht mitmachen.
Du kannst Dateien in diesem Forum nicht posten
Du kannst Dateien in diesem Forum herunterladen

Powered by phpBB © 2001, 2002 phpBB Group
mtechnik